5-138 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:GLISt[:GRAPhics]:INTerpolate
:PAGE:GLISt[:GRAPhics]:INTerpolate
This command selects whether interpolation mode of marker is on or off.
At *RST, this value is OFF.
Syntax :PAGE:GLISt [ :GRAPhics] :INTerpolate OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:GLIS:INT ON"
OUTPUT @Hp4155;":PAGE:GLIS:INT?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:LINE:CTMarker
This command moves the cursor to the marker's position.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :LINE:CTMarker
Example OUTPUT @Hp4155;":PAGE:GLIS:LINE:CTM"
Parameter Type Explanation
OFF or 0 boolean interpolation is off
ON or 1 boolean interpolation is on
To Next Page
Loading...
