Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-93
SCPI Commands
:PAGE:CHANnels[:CDEFinition]:SMU<n>:VNAMe
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:CHAN:SMU1:STANDBY ON"
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:STANDBY?"
ENTER @Hp4155;A
:PAGE:CHANnels[:CDEFinition]:SMU<n>:VNAMe
This command sets the VNAME of SMU<n>.
<n> is required to specify SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
At *RST, this value is:
Syntax :PAGE:CHANnels [ :CDEFinition] :SMU<n>:VNAMe name
Parameter
Query response name <newline><^END>
name is string response data, but does not contain double quote characters at the
beginning and end of the string.
Example OUTPUT @Hp4155;":PAGE:CHAN:SMU1:VNAME 'VD'"
OUTPUT @Hp4155;":PAGE:CHAN:SMU1:VNAME?"
ENTER @Hp4155;A$
Parameter Type Explanation
OFF or 0 boolean standby function is OFF
ON or 1 boolean standby function is ON
SMU VNAME
SMU1 through SMU4 V<n>
SMU5 and SMU6 not defined
Parameter Type Explanation
name string String of up to 6 alphanumeric characters.
1 st character must be alphabet.
To Next Page
Loading...
Need help?
General
