Agilent Technologies 4155C

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-111
SCPI Commands
:PAGE:DISPlay:ANALysis:LINE(1|2):GRADient
:PAGE:DISPlay:ANALysis:LINE(1|2):GRADient
This command sets the gradient value of LINE1 or LINE2.
If LINE(1|2):MODE is not GRADient, this parameter is ignored.
At *RST, this value is undefined.
Syntax :PAGE:DISPlay:ANALysis:LINE(1 | 2):GRADient gradient
Parameter
Query response gradient <newline><^END>
gradient is string response data, but does not contain double quote characters at the
beginning and end of the string.
Example OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:GRAD '2.0'"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:GRAD?"
ENTER @Hp4155;A$
Parameter Type Explanation
gradient string expression for gradient value of line