Agilent Technologies 4155C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-155
SCPI Commands
:PAGE:KSWeep:VAR1:POINts
:PAGE:KSWeep:VAR1:POINts
This command sets the number of steps for VAR1 of knob sweep measurement.
At *RST, this value is 101.
Syntax :PAGE:KSWeep:VAR1:POINts points | MINimum | MAXimum
Parameter
Query response points <newline><^END>
points is NR1 response data type.
Example OUTPUT @Hp4155;":PAGE:KSW:VAR1:POIN 101"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:POIN MAX"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:POIN?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:KSW:VAR1:POIN?MAX"
ENTER @Hp4155;A
Parameter Type Explanation
points numeric 1 to 1001

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English