Agilent Technologies 4155C Command Reference

5-246 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:SCONtrol:TRIGger:OUTPut:LEVel
:PAGE:SCONtrol:TRIGger:OUTPut:LEVel
This command outputs a level trigger from the external trigger output terminal.
This command does not have query form.
Syntax
Parameter
:PAGE:SCONtrol:TRIGger:OUTPut:LEVel HIGH | LOW
Example OUTPUT @Hp4155;":PAGE:SCON:TRIG:OUTP:LEV HIGH"
:PAGE:SCONtrol:TRIGger:OUTPut[:PULSe]
This command outputs a pulse trigger from the external trigger output terminal.
This command does not have query form.
Syntax
Parameter
:PAGE:SCONtrol:TRIGger:OUTPut [ :PULSe] POSitive | NEGative
Example OUTPUT @Hp4155;":PAGE:SCON:TRIG:OUTP POS"
:PAGE:SCONtrol:ZERO
This command measures the zero offset that will be used for zero offset
cancellation.
Executing this command is about the same as pressing Green front-panel key, then
pressing Stop front-panel key.
This command does not have query form.
Syntax :PAGE:SCONtrol:ZERO
Example OUTPUT @Hp4155;":PAGE:SCON:ZERO"
Parameter Type Explanation
HIGH character output level is changed to HIGH
LOW character output level is changed to LOW
Parameter Type Explanation
POSitive character output level is changed to LOW-HIGH-LOW
NEGative character output level is changed to HIGH-LOW-HIGH

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English