Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-61
SCPI Commands
:HCOPy:TRAiler
:HCOPy:TRAiler
This command sets the TRAILER STRING, which are the commands you want to
send to the printer or plotter after printing or plotting.
At *RST, this value is set to the empty string.
Syntax :HCOPy:TRAiler trailer_string
Parameter
You can specify non-printable ASCII characters by backslash and octal code (ASCII
code). For example, \033 specifies the <ESC> character.
Query response trailer_string <newline><^END>
Example OUTPUT @Hp4155;":HCOP:TRA '\033E'"
OUTPUT @Hp4155;":HCOP:TRAILER?"
ENTER @Hp4155;A$
Parameter Type Explanation
trailer_string string trailer string
To Next Page
Loading...
