Agilent Technologies 4155C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-17
SCPI Commands
:DATA|:TRACe:UNIT
:DATA|:TRACe:UNIT
This command sets the unit for data of the specified user variable.
The user variable must first be defined by the :DATA | :TRACe:DEFine or
:PAGE:CHANnels:UVARiable:DEFine command, or on the CHANNELS: USER
VARIABLE DEFINITION page.
Syntax :DATA | :TRACe:UNIT user_variable_name ,unit
Parameter
Query response unit <newline><^END>
Example OUTPUT @Hp4155;":TRAC:UNIT 'Vdata','mV'"
OUTPUT @Hp4155;":TRAC:UNIT? 'Vdata'"
ENTER @Hp4155;A$
Parameter Type Explanation
user_variable_name string or
character
user variable name to specify unit for
unit string unit of the user variable data

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English