Agilent Technologies 4155C

5-46 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:HCOPy:ITEM:TDSTamp:STATe
:HCOPy:ITEM:TDSTamp:STATe
This command sets whether the present date and time of the built-in clock
(DATE&TIME) should be plotted or printed when the :HCOPy:IMMediate
command or :HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
Syntax :HCOPy:ITEM:TDSTamp:STATe OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":HCOP:ITEM:TDST:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:TDST:STAT?"
ENTER @Hp4155;A
:HCOPy:ITEM:PNUMber:STATe
This command sets whether the page number of the plot or print out (PAGE NO.)
should be plotted or printed when the :HCOPy:IMMediate command or
:HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
This command does not comply with SCPI.
Syntax :HCOPy:ITEM:PNUMber:STATe OFF | ON | 0 | 1
Parameter
Parameter Type Explanation
OFF or 0 boolean DATE&TIME is not plotted or printed.
ON or 1 boolean DATE&TIME is plotted or printed.
Parameter Type Explanation
OFF or 0 boolean PAGE NO is not plotted or printed.
ON or 1 boolean PAGE NO is plotted or printed.