Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-285
SCPI Commands
:PROGram[:SELected]:DELete[:SELected]
:PROGram[:SELected]:DELete[:SELected]
This command deletes the downloaded program.
This command does not have query form.
Syntax :PROGram [ : SELected ] :DELete [ : SELected ]
Example OUTPUT @Hp4155;":PROG:DEL"
:PROGram[:SELected]:DELete:ALL
This command deletes the downloaded program.
For the 4155C/4156C, only one program can be downloaded. Therefore, this
command is the same as :PROGram[:SELected]:DELete[:SELected].
This command does not have query form.
Syntax :PROGram [ : SELected ] :DELete:ALL
Example OUTPUT @Hp4155;":PROG:DEL:ALL"
See also :PROGram[:SELected]:DELete[:SELected]
:PROGram[:SELected]:EXECute
This command executes the specified Instrument BASIC command for the
downloaded program.
The downloaded program must be in either the PAUSed or STOPped state.
This command does not have query form.
Syntax :PROGram [:SELected] :EXECute command
Parameter
Example OUTPUT @Hp4155;":PROG:EXEC 'STEP'"
Parameter Type Explanation
command string Instrument BASIC command
To Next Page
Loading...
Need help?
General
