5-42 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:HCOPy:ITEM:ALL:DATA?
:HCOPy:ITEM:ALL:DATA?
This command returns hardcopy (PCL or HP-GL) data of all output items, including
items not selected by the :HCOPy:ITEM subsystem commands.
This command has query form only.
Syntax :HCOPy:ITEM:ALL:DATA?
Query response #0{data element} <newline><^END>
Response is in indefinite length arbitrary block response data format.
:HCOPy:ITEM:ALL[:IMMediate]
This command immediately plots or prints all output items, including items not
selected by the :HCOPy:ITEM subsystem commands.
This command does not have query form.
Syntax :HCOPy:ITEM:ALL [ :IMMediate]
Example OUTPUT @Hp4155;":HCOP:ITEM:ALL"
:HCOPy:ITEM:ANNotation:STATe
This command sets whether the title of the print or plot out (TITLE) should be
plotted or printed when the :HCOPy:IMMediate command or :HCOPy:DATA?
query is sent.
At *RST, the value of this parameter is ON.
Syntax :HCOPy:ITEM:ANNotation:STATe OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Parameter Type Explanation
OFF or 0 boolean Title is not plotted or printed.
ON or 1 boolean Title is plotted or printed.
To Next Page
Loading...
