Agilent Technologies 4155C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-243
SCPI Commands
:PAGE:SCONtrol[:MEASurement]:REPeat
:PAGE:SCONtrol[:MEASurement]:REPeat
This command starts the REPeat measurement operation.
The executed measurement mode, SWEep or SAMPling, is selected by the
:PAGE:CHANnels[:CDEFinition]:MODE command.
This command changes the present display page to the GRAPH/LIST: LIST or
GRAPH/LIST: GRAPHICS page, which is selected by the
:PAGE:DISPlay[:SETup]:MODE command.
Executing this command is about the same as pressing Repeat front-panel key.
This command does not have query form.
Syntax :PAGE:SCONtrol [ :MEASurement] :REPeat
Example OUTPUT @Hp4155;":PAGE:SCON:REP"
See also :PAGE:CHANnels[:CDEFinition]:MODE and :PAGE:DISPlay[:SETup]:MODE
:PAGE:SCONtrol[:MEASurement]:SINGle
This command starts the SINGle measurement operation.
The executed measurement mode, SWEep or SAMPling, is selected by the
:PAGE:CHANnels[:CDEFinition]:MODE command.
This command changes the present display page to the GRAPH/LIST: LIST or
GRAPH/LIST: GRAPHICS page, which is selected by the
:PAGE:DISPlay[:SETup]:MODE command.
Executing this command is about the same as pressing Single front-panel key.
This command does not have query form.
Syntax :PAGE:SCONtrol [ :MEASurement] :SINGle
Example OUTPUT @Hp4155;":PAGE:SCON:SING"
See also :PAGE:CHANnels[:CDEFinition]:MODE and :PAGE:DISPlay[:SETup]:MODE

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English