Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-289
SCPI Commands
STATus Subsystem
The STATus subsystem accesses the non-IEEE488.2 status structures of the
4155C/4156C.
These status structures are as follows:
• Operation Status Register (for SCPI) Consists of CONDITION, TRANSITION
FILTER, EVENT, and event enable (MASK) registers.
• Questionable Status Register (for SCPI) Consists of CONDITION,
TRANSITION FILTER, EVENT, and event enable (MASK) registers.
• Emergency Status Register (for 4155C/4156C) Consists of EVENT and event
enable (MASK) registers.
• Measure/Stress Status Register (for 4155C/4156C) Consists of EVENT and
event enable (MASK) registers.
Refer to Chapter 3 for details about these registers and about the status-reporting
structure of both non-IEEE488.2 and IEEE488.2 status structures.
The following table is the command tree of STATus subsystem.
Command Parameter
:STATus
:EMERgency
:ENABle <numeric_value>
[:EVENt]?
:MEASurement
:ENABle <numeric_value>
[:EVENt]?
:OPERation
:CONDition?
:ENABle <numeric_value>
[:EVENt]?
To Next Page
Loading...
Need help?
General
