Agilent Technologies 4155C

5-282 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
PROGram Subsystem
The PROGram subsystem downloads and controls the user-defined Instrument
BASIC program in an instrument.
The following table is the command tree of PROGram subsystem.
Command Parameter
:PROGram
:CATalog?
[:SELected]
:DEFine <program>
:DELete
[:SELected]
:ALL
:EXECute
:MALLocate <nbytes> | DEFault
:NAME <prog_name>
:NUMBer <varname> {,<nvalues>}
:STATe RUN | PAUSe | STOP | CONTinue
:STRing <varname> {,<svalues>}
:WAIT