Agilent Technologies 4155C

5-158 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:KSWeep:Y
:PAGE:KSWeep:Y
This command selects the measurement channel name of Y axis for knob sweep
measurement.
At *RST, this value is I3.
Syntax :PAGE:KSWeep:Y var_name
Parameter
Query response var_name <newline><^END>
var_name is string response data, but does not contain double quote characters at the
beginning and end of the string.
Example OUTPUT @Hp4155;":PAGE:KSW:Y 'VD'"
OUTPUT @Hp4155;":PAGE:KSW:Y?"
ENTER @Hp4155;A$
Parameter Type Explanation
var_name string previously defined measurement channel name