5-150 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:KSWeep:DISPlay:DIRection:X
Example OUTPUT @Hp4155;":PAGE:KSW:CURS:Y 1.35"
OUTPUT @Hp4155;":PAGE:KSW:CURS:Y MAX"
OUTPUT @Hp4155;":PAGE:KSW:CURS:Y?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:KSW:CURS:Y? MIN"
ENTER @Hp4155;A
:PAGE:KSWeep:DISPlay:DIRection:X
This command sets the display direction of the X axis for knob sweep.
At *RST, this value is NORMal.
Syntax :PAGE:KSWeep:DISPlay:DIRection:X NORMal | REVerse
Parameter
Query response NORM | REV <newline><^END>
Example OUTPUT @Hp4155;":PAGE:KSW:DISP:DIR:X NORM"
OUTPUT @Hp4155;":PAGE:KSW:DISP:DIR:X?"
ENTER @Hp4155;A$
Parameter Type Explanation
NORMal character Leftmost point on X axis is minimum value.
REVerse character Rightmost point on X axis is minimum value.
To Next Page
Loading...
