Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-177
SCPI Commands
:PAGE:MEASure:OSEQuence:TRIGger:TIME
:PAGE:MEASure:OSEQuence:TRIGger:TIME
This command sets the trigger output timing.
If TRIGger:FUNCtion is INPut, this parameter is not used.
At *RST, this value is 0, which means free run.
Syntax :PAGE:MEASure:OSEQuence:TRIGger:TIME time | MINimum | MAXimum
Parameter
Query response time <newline><^END>
time is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:MEAS:OSEQ:TRIG:TIME 0.01"
OUTPUT @Hp4155;":PAGE:MEAS:OSEQ:TRIG:TIME MAX"
OUTPUT @Hp4155;":PAGE:MEAS:OSEQ:TRIG:TIME?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:OSEQ:TRIG:TIME? MAX"
ENTER @Hp4155;A
Parameter Type Explanation
time numeric 0 to 1 (when SMU pulse is not used)
0 to 0.0327 or pulse width, whichever is shorter.
(when SMU pulse is used)
To Next Page
Loading...
