Agilent Technologies 4155C

5-280 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:SYSTem:CDIagnostic[:MENU]
:PAGE:SYSTem:CDIagnostic[:MENU]
This command changes the current display page to :SYSTEM:
SELF-CALIBRATION/DIAGNOSTICS page.
This command does not have query form.
Syntax :PAGE:SYSTem:CDIagnostic [ :MENU]
Example OUTPUT @Hp4155;":PAGE:SYST:CDI"
:PAGE:SYSTem:COLor[:MENU]
This command changes the current display page to ":SYSTEM: COLOR SETUP"
page.
This command does not have query form.
Syntax :PAGE:SYSTem:COLor [ :MENU]
Example OUTPUT @Hp4155;":PAGE:SYST:COL"
:PAGE:SYSTem:CONFig[:MENU]
This command changes the current display page to ":SYSTEM:
CONFIGURATION" page.
This command does not have query form.
Syntax :PAGE:SYSTem:CONFig [ :MENU]
Example OUTPUT @Hp4155;":PAGE:SYST:CONF"
:PAGE:SYSTem:FILer[:MENU]
This command changes the current display page to ":SYSTEM: FILER" page.
This command does not have query form.
Syntax :PAGE:SYSTem:FILer [ :MENU]
Example OUTPUT @Hp4155;":PAGE:SYST:FIL"