Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-315
SCPI Commands
:SYSTem:COMMunicate:NETwork[:SELF]:GATEway
:SYSTem:COMMunicate:NETwork[:SELF]:GATEway
This command sets the IP address of the gateway used for access outside the
4155C/4156C subnet.
The *RST command has no effect on the value of this parameter. The query returns
the present setting.
Syntax :SYSTem:COMMunicate:NET [:SELF]:GATEway ipaddress
:SYSTem:COMMunicate:NET [:SELF]:GATEway?
Parameter
Query response ipaddress <newline><^END>
Example OUTPUT @Hp4155;":SYST:COMM:NET:GATE '127.0.2.52'"
OUTPUT @Hp4155;":SYST:COMM:NET:GATE?"
ENTER @Hp4155;A$
Parameter Type Explanation
ipaddress string IP address of the gateway. String of up to 15
characters. A value of 0.0.0.0 disables this function.
To Next Page
Loading...
