5-196 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:MEASure:QSCV:LCANcel
:PAGE:MEASure:QSCV:LCANcel
This command enables or disables leakage current compensation for Quasi-static
CV measurements. This command also has a query form.
At *RST, this value is OFF.
Syntax :PAGE:MEASure:QSCV:LCANcel OFF | ON | 0 | 1
:PAGE:MEASure:QSCV:LCANcel?
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:MEAS:QSCV:LCAN ON"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:LCAN?"
ENTER @Hp4155;A
Parameter Type Explanation
OFF or 0 Boolean Leakage current compensation is disabled.
ON or 1 Boolean Leakage current compensation is enabled.
To Next Page
Loading...
