Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-55
SCPI Commands
:HCOPy:PAGE:DIMensions:URIGht
Syntax :HCOPy:PAGE:DIMensions:QUADrant<n>
Example OUTPUT @Hp4155;":HCOP:PAGE:DIM:QUAD1"
See also :HCOPy:PAGE:DIMensions:LLEFt, :HCOPy:PAGE:DIMensions:URIGht
:HCOPy:PAGE:DIMensions:URIGht
This command sets the upper right corner of the output region.
At *RST, the value of this parameter is (100,100).
Syntax :HCOPy:PAGE:DIMensions:URIGht x, y
Parameter
Query response x, y <newline><^END>
The data type of x and y are NR3 response data.
Example OUTPUT @Hp4155;":HCOP:PAGE:DIM:URIG 90,10"
OUTPUT @Hp4155;":HCOP:PAGE:DIM:URIG?"
ENTER @Hp4155;A,B
:HCOPy:PAGE:DIMensions:WHOLe
This command sets the output region to full size available for the paper.
Syntax :HCOPy:PAGE:DIMensions:WHOLe
Example OUTPUT @Hp4155;":HCOP:PAGE:DIM:WHOL"
Parameter Explanation
x percentage from the left side of the paper
y percentage from the bottom of the paper
To Next Page
Loading...
