Agilent Technologies 4155C

To Next Page

To Previous Page

5-144 Agilent 4155C/4156C SCPI Command Reference, Edition 1

SCPI Commands

:PAGE:GLISt[:GRAPhics]:SCALing:CANCel

This command redraws the plotting area with the "original settings".

"Original settings" means the most recent settings of the DISPLAY: DISPLAY

SETUP page or RE-SETUP GRAPH secondary softkey.

This command does not have query form.

Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CANCel

Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CANC"

:PAGE:GLISt[:GRAPhics]:SCALing:CENTer

This command redraws the graphic display so that it is centered around the present

cursor position.

This command does not have query form.

Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CENTer

Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CENT"

:PAGE:GLISt[:GRAPhics]:SCALing:CTMarker

This command moves the cursor to the marker's position.

This command does not have query form.

Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CTMarker

Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CTM"

Other manuals for Agilent Technologies 4155C