Agilent Technologies 4155C Command Reference

5-216 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:MEASure:SAMPling:SCONdition:EDELay
:PAGE:MEASure:SAMPling:SCONdition:EDELay
This command sets the ENABLE DELAY time for the stop condition of sampling
measurement.
Syntax :PAGE:MEASure:SAMPling:SCONdition:EDELay enable_delay | MINimum |
MAXimum
Parameter
Query response enable_delay <newline><^END>
enable_delay is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL 1.0"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL MAX"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL? MAX"
ENTER @Hp4155;A
:PAGE:MEASure:SAMPling:SCONdition:EVENt
This command sets the EVENt to use with the NAME and THReshold to define the
stop condition of sampling measurement.
EVENt describes the relation between THReshold and the value of the NAME
variable.
Syntax :PAGE:MEASure:SAMPling:SCONdition:EVENt LOW | HIGH | ABSLow |
ABSHigh
Parameter Type Explanation
enable_delay numeric 0 to (initial_interval ´ 32767)

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English