Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-241
SCPI Commands
:PAGE:SCON Commands
:PAGE:SCON commands controls the state of the 4155C/4156C, such as
measurement, stress forcing, standby, and idle.
Command Parameter
:PAGE
:SCONtrol
:KSWeep
[:STARt]
[:MEASurement]
:APPend
:REPeat
:SINGle
:STANdby 0 | 1 | OFF | ON
:STATe?
:STOP
:STRess
[:STARt]
:TRIGger
:INPut? POSitive | NEGative | EITHer
:OUTPut
[:PULSe] POSitive | NEGative
:LEVel HIGH | LOW
:ZERO
To Next Page
Loading...
