6.5 ASSEMBLY 6 SERVICE, DISMANTLING, ASSEMBLY
100
5 Fitting the top bearing housing.
G0866621
a Fit the axial springs to the top
bearing housing.
o
b Carefully lower the bowl spindle.
Make sure that the springs enter the
recesses on the top bearing seat.
d Fit the composite springs and
plugs to the top bearing housing.
Do not tighten the plugs.
Make sure that the springs enter the
recesses in the top bearing seat.
The plugs should be tightened when
the spindle assembly is mounted into
the frame.
o
Axial springs
c Lubricate the threads with oil before
assembly.
To Next Page
Loading...
