31
5 OPERATING INSTRUCTIONS 5.4 START
5.4 Start
1 Start of separator.
2 Check the separator for vibration.
G0871741
b Start the separator by pushing
the start button at the starter
unit.
a Open the water
supply valve.
G0871841
W
A
R
N
I
N
G
!
Excessive vibration
If vibration increases, or
continues at full speed, keep
bowl filled and stop the
separator.
The cause of the vibration must
be determined and corrected
before starting again!
Excessive vibration may be due
to incorrect assembly or
insufficient cleaning of the bowl.
N
O
T
E
Normal vibration
Vibration may occur during start
up when passing critical speed.
This is normal and should pass
without danger.
To Next Page
Loading...
