169
9 INSTALLATION 9.2 UPON ARRIVAL AT THE STORAGE AREA
9.2.2 Protection and storage of gods
G0873611
a The separator must be stored indoors at 5 -
55 °C, if not delivered in a water-resistant
box, designated for outdoor storage.
b If there is a risk for water condensation, the
equipment must stand well ventilated and at
a temperature above dew point.
c If the storage time exceeds 12 months, the
equipment must be inspected every 6
months and, if necessary, the protection be
renewed.
The following protection products are
recommended:
1 Anti-rust oil (Dinitrol 112 or equivalent) with long
lasting effective treatment for external surfaces.
The oil should prevent corrosion attacks and
leaves a waxy surface.
2 Anti-rust oil (Dinitrol 40 or equivalent) is a thin
lubricant for inside protection. It gives a
lubricating transparent oil film.
3 Solvent, e.g. white spirit, to remove the anti-rust
oil after the storage period.
4 Moist remover to be packed together with the
separator equipment.
To Next Page
Loading...
