6.3 DISMANTLING 6 SERVICE, DISMANTLING, ASSEMBLY
64
4 Removing the operating water cover.
5 Removing the neck bearing cover and deflector ring.
G0858931
N
O
T
E
If the cover sticks, fit two M8
screws to the threaded holes
and tighten.
a Remove the screws.
b Lift off the operating water cover.
G0859051
d Lift off the neck bearing cover
together with the deflector ring.
a Attach the tools.
Cover
b Fasten the tool to
the cover.
c Ease off the
cover by
tightening
the screw.
Frame
To Next Page
Loading...
