Alfa Laval S 821 - Fitting Ball Bearing to Top Bearing Seat

6.5 ASSEMBLY 6 SERVICE, DISMANTLING, ASSEMBLY
98
3 Fitting the ball bearing to the top bearing seat .
o
G0984851
a Heat the top bearing seat in oil to
+80°C above room temperature
(max.125 °C).
b Fit the ball bearing.
N
O
T
E
Always fit a new bearing.
Pre-lubricate before fitting.
c Fit the snap ring.
W
A
R
N
I
N
G
!
Risk for eye injury from flying snap ring
Use the correct pliers for assembly of snap ring to
avoid accidental release.
W
A
R
N
I
N
G
!
Burn hazard
Use protective
gloves when
handling any heated
parts.
Drop some frame oil onto the bearing.