Alfa Laval S 821 - Checkpoints During Operation

5.5 OPERATING 5 OPERATING INSTRUCTIONS
34
5.5 Operating
1 Checkpoints during operation:
G0871541
a Check all connections for leakage.
e Check for abnormal vibrations
and sounds.
W
A
R
N
I
N
G
!
Burning hazard
Lubricating oil and various machine
surfaces can be hot and cause burns.
W
A
R
N
I
N
G
!
Disintegration hazard
Do not discharge a vibrating separator.
Vibration can increase if solidified
sludge is only partially discharged.
d Check that the starter ammeter reading
is the normal low and steady value.
b Check that the feed has correct flow and
temperature.
c Check the back pressure.