6.7 OIL CHANGE 6 SERVICE, DISMANTLING, ASSEMBLY
138
6.7.6 Lubricating oils
Alfa Laval ref. 567330-01, rev. 2
Paraffinic mineral lubricating oil,
category (ISO-L-) HM 68.
Viscosity grade (ISO-3448/3104) VG 68.
The oil shall follow the requirements in one of
the standards below.
The following is the list of recommended oil
brands. Trade names and designations might
vary from country to country. Please contact
your local oil supplier for more information.
Standard Designation
DIN 51524 part 2 or 3* (German standard) DIN 51524-HLP or HVLP* 68
ISO 11158 (International standard) ISO-L-HM or HV* 68
Viscosity index (ISO 2909) VI>95
Manufacturer Designation
Alfa Laval 567334-01 1 litre
567334-02 4 litres
BP Bartran 68
Bartran HV 68*
Castrol Hyspin AWS 68
Hyspin AWH(-M) 68*
ChevronTexaco / FAMM Hydraulic oil AW 68
Rando HD 68 (H2)
Rando HDZ 68 (H2)*
Rykon Premium 68 (H2)*
ExxonMobil Nuto H 68
Univis N 68*
Mobil DTE 16 (ISO VG 68)
Mobil DTE 16M (ISO VG 68)*
Q8/Kuwait Petroleum Haydn 68
Shell Tellus Oil 68
Tellus Oil S 68
Tellus Oil T 68*
Statoil HydraWay HMA 68
Hydra Way HVXA 68*
Tot al Azolla ZS 68
Elf Lubmarine Visga 68*
* These oils should be used at cold start, i.e. when the ambient temperature is
below 20
o
C.
The list of recommended oil brands is not complete. Other oil brands may be
used as long as the follow the above standards and have equivalent high quality
as the brands recommended. The use of other lubricants than recommended is
done on the exclusive responsibility of the user or oil supplier.
To Next Page
Loading...
