5.2 START AFTER SERVICE 5 OPERATING INSTRUCTIONS
30
5.2 Start After Service
Pay special attention to any unusual sounds or
vibrations when starting the separator after a
service. Different fault symptoms are listed in
chapter
7 Fault Finding, page 141.
5.3 Before Normal Start
To achieve the best separation results, the
bowl should be in a clean condition.
1 Check...
G0871441
... that all couplings and connections are
securely tightened to prevent leakages.
Leaking hot liquid can cause burns.
... that all frame hood bolts
as well as the clutch cover
are fully tightened
... that the lock nut is fully tightened.
Do not forget the washer.
... the direction of rotation by doing a quick
start/stop. The motor fan should rotate
clockwise.
... the oil level and top up if
necessary.
N
O
T
E
The separator should be level and at
standstill when oil is filled.
To Next Page
Loading...
