Alfa Laval S 821 - Check Legibility of Labels

6.6 ACTIONS AFTER ASSEMBLY 6 SERVICE, DISMANTLING, ASSEMBLY
130
2 Check legibility. Following texts should be read on the labels.
WARNING
Read the instruction manuals before installation, operation and maintenance.
Consider inspection intervals.
Failure to strictly follow instructions can lead to fatal injury.
If excessive vibration occurs, stop separator and keep bowl filled with liquid
during rundown.
Out of balance vibration will become worse if bowl is not full.
Separator must stop rotating before any dismantling work is started.
Read instruction manual before lifting.
Separator
Manufacturing serial No. / Year
Product No.
In and outlet device
Bowl
Machine bottom part
Bowl speed synchronous
Direction of rotation (bowl)
Speed motor shaft
El. current frequency
Recommended motor power
Max. density of feed
Max. density of sediment
Max. density of operating liquid
Process temperature min./max.
XXXXX XXX XXXX XXX
XXXXX XXXX X XXXX XXX
XX.
XXX XXX X XXX XX XXXX
XXXX XX X X XXXXX XXX
X XXX XXXX XXX XX XX X
X XXX X XXX.
XX X XXXXX XX X XXXX
XXX XXX X XXXXXX
XXX XXX XXX X XXXXX
XXX X XXXX .
XXXXXXXXXXXXXXXXX
XXXX XXXX XXXX
XXXXXXXXXXXX XXX
XXXXXXX XXXXX XX
XXXXX XXXXXXX
XXXXXXXXX.
XXXXXXX/XX,X XX
WARNING
XXXXX X XXXXX XX X
XXX XX XXX XXX XX X.
!