disable 802.1x
Purpose Used to disable the 802.1x server on the Switch.
Syntax disable 802.1x
Description The disable 802.1x command is used to disable the 802.1x Network Access control server application on
the Switch.To select between port-based or MAC-based, use the config 802.1x auth_mode command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable 802.1x on the switch:
AT-9724TS:4# disable 802.1x
Command: disable 802.1x
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
create 802.1x user
Purpose Used to create a new 802.1x user.
Syntax create 802.1x user <username 15>
Description The create 802.1x user command is used to create new 802.1x users.
Parameters <username 15> – A username can be as many as 15 alphanumeric characters.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an 802.1x user:
AT-9724TS:4# create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case sensitive new password: * * * * * *
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
168
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual