show 802.1x user
Purpose Used to display the 802.1x user accounts on the Switch.
Syntax show 802.1x user
Description The show 802.1x user command is used to display the 802.1x Port-based or MAC-based Network Access
control local users currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view 802.1X users currently configured on the Switch:
AT-9724TS:4# show 802.1x user
Command: show 802.1x user
Current Accounts:
U s e r N a m e P a s s w o r d
-------------- - - - - - - - - - - - - - -
D a r r e n T r i n i t y
Total entries: 1
A T - 9 7 2 4 T S : 4 #
delete 802.1x user
Purpose Used to delete an 802.1x user account on the Switch.
Syntax delete 802.1x user <username 15>
Description The delete 802.1x user command is used to display the 802.1x Port-based or MAC-based Network Access
control local users currently configured on the Switch.
Parameters <username 15> – A username can be as many as 15 alphanumeric characters.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete 802.1x users:
AT-9724TS:4# delete 802.1x user dtremblett
Command: delete 802.1x user dtremblett
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
169
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual