Allied Telesis AT-9724TS Reference Manual

show dvmrp routing_table
Purpose Used to display the current DVMRP routing table.
Syntax show dvmrp routing table [ipaddress <network_address>]
Description The command is used to display the current DVMRP routing table.
Parameters ipaddress <network_address> – The IP address and netmask of the destination.The address and mask
information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
10.1.2.3/8).
Restrictions None.
Example usage:
To display DVMRP routing table:
AT-9724TS:4# show dvmrp routing_table
Command: show dvmrp routing_table
D V M R P Routing Table
Source Address/ U p s t r e a m M e t r i c L e a r n e d I n t e r f a c e E x p i r e
N e t m a s k N e i g h b o r
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 0 . 0 . 0 / 8 1 0 . 9 0 . 9 0 . 9 0 2 L o c a l S y s t e m -
2 0 . 0 . 0 . 0 / 8 2 0 . 1 . 1 . 1 2 L o c a l i p 2 1 1 7
3 0 . 0 . 0 . 0 / 8 3 0 . 1 . 1 . 1 2 D y n a m i c i p 3 1 0 6
A T - 9 7 2 4 T S : 4 #
show dvmrp neighbor
Purpose Used to display the DVMRP neighbor table.
Syntax show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
Description This command will display the current DVMRP neighbor table.
Parameters <ipif_name 12> – The name of the IP interface for which you want to display the DVMRP neighbor table.
Restrictions None.
Example usage:
To display DVMRP neighbor table:
AT-9724TS:4# show dvmrp neighbor
Command: show dvmrp neighbor
D V M R P Neighbor Address Table
I n t e r f a c e N e i g h b o r Generation ID E x p i r e
T i m e A d d r e s s
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 2 . 1 . 1 2 3 2 2 5 0
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
241
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g