Allied Telesis AT-9724TS Reference Manual

show dvmrp nexthop
Purpose Used to display the current DVMRP routing next hop table.
Syntax show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
Description This command will display the DVMRP routing next hop table.
Parameters ipaddress <network_address> – The IP address and netmask of the destination.The address and mask
information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
10.1.2.3/8).
<ipif_name 12> – The name of the IP interface for which you want to display the current DVMRP routing next
hop table.
Restrictions None.
Example usage:
To display DVMRP routing next hop table:
AT-9724TS:4# show dvmrp nexthop
Command: show dvmrp nexthop
Source IP I n t e r f a c e T y p e
A d d r e s s / N e t m a s k N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 0 . 0 . 0 / 8 i p 2 L e a f
1 0 . 0 . 0 . 0 / 8 i p 3 L e a f
2 0 . 0 . 0 . 0 / 8 S y s t e m L e a f
2 0 . 0 . 0 . 0 / 8 i p 3 L e a f
3 0 . 0 . 0 . 0 / 8 S y s t e m L e a f
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
show dvmrp
Purpose Used to display the current DVMRP settings on the Switch.
Syntax show dvmrp {<ipif_name 12>}
Description This command will display the current DVMRP routing table.
Parameters <ipif_name 12> – This parameter will allow the user to display DVMRP settings for a specific IP interface.
Restrictions None.
Example usage:
To show DVMRP configurations:
AT-9724TS:4# show dvmrp
Command: show dvmrp
D V M R P Global State: D i s a b l e d
I n t e r f a c e I P A d d r e s s N e i g h b o r P r o b e M e t r i c S t a t e
T i m e o u t
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S y s t e m 1 0 . 9 0 . 9 0 . 9 0 / 8 3 5 1 0 1 D i s a b l e d
Total Entries: 1
A T - 9 7 2 4 T S : 4 #
242
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g