Allied Telesis AT-9724TS Reference Manual

show route preference
Purpose Used to display the route preference of each route type.
Syntax show route preference {[local | static | rip | ospfIntra | ospfInter | ospfExt1 | ospfExt2]}
Description This command will display the Route Preference Settings table.The user may view all route preference settings
by entering the command without any parameters or choose a specific type by adding the route parameter to
the command.
Parameters local – Enter this parameter if you wish to view the route preference settings for the local route.
static – Enter this parameter if you wish to view the route preference settings for the static route.
rip – Enter this parameter if you wish to view the route preference settings for the RIP route.
ospfIntra – Enter this parameter if you wish to view the route preference settings for the Ospf Intra-area route.
ospfInter – Enter this parameter if you wish to view the route preference settings for the OSPF Inter-area
route.
ospfExtT1 – Enter this parameter if you wish to view the route preference settings for the OSPF AS External
route type-1.
Entering this command with no parameters will display the route preference for all routes.
Restrictions None.
Example usage:
To view the route preference values for all routes:
AT-9724TS:4# show route preference
Command: show route preference
Route Preference Settings
Route Type P r e f e r e n c e
- - - - - - - - - - - - - - - - - - - -
OSPF Intra 8 0
S T A T I C 6 0
OSPF Inter 9 0
OSPF ExtT1 1 1 0
OSPF ExtT2 1 1 5
A T - 9 7 2 4 T S : 4 #
Example usage:
To view the route preference values for the RIP route:
AT-9724TS:4# show route preference rip
Command: show route preference rip
Route Preference Settings
Route Type P r e f e r e n c e
- - - - - - - - - - - - - - - - - - - -
R I P 1 0 0
A T - 9 7 2 4 T S : 4 #
270
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g