Autonics krn100 series - Alarm□ Value(Alarm□ Set Value)

8 Parameter detail setup
78 © Copyright Reserved Autonics Co., Ltd.
When power is ON, it is alarm condition and it is ignored. From second alarm conditions, it
operates as standard alarm.
8.2.6 Alarm□ Value(Alarm□ set value)
Set alarm set value based on alarm output operation mode, it executes alarm operation.
 Setting range: Using set input from Input Type(Input specification)/within display range
 Factory default: Alarm1 value: 1350.0, Alarm2 Value to Alarm4 Value: -