Autonics krn100 series - Ethernet Com Write (Ethernet Communication Write); USB Device Port (Use USB Communication); USB Com Write (USB Communication Write)

8 Parameter detail setup
96 © Copyright Reserved Autonics Co., Ltd.
8.4.14 Ethernet Com Write (Ethernet communication write)
Set whether changing the set value of KRN100 parameter by Ethernet communication.
To read the set value of each parameter is available regardless of the communication write
enable/disable setting.
 Setting range: Enable ↔ Disable
 Factory default: -
8.4.15 USB Device Port (Use USB communication)
Set whether using USBcommunication.
USB communication is available regardless of RS485 Port or Ethernet Port setting.
 Setting range: Enable ↔ Disable
 Factory default: Enable
8.4.16 USB Com Write (USB communication write)
Set whether changing the set value of KRN100 parameter by USB communication.
To read the set value of each parameter is available regardless of the communication write
enable/disable setting.
 Setting range: Enable ↔ Disable
 Factory default: Enable