Autonics krn100 series - Memory Status (Memory Capacity); Memory Clear (Delete Memory)

8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 121
8.8.3 Memory Status (Memory capacity)
Displays system memory usage in %.
If memory usage is 100%, depending the set value of ‘8.8.6 Memory Save Option (Memory
storage option)’, new data is overwritten on oldest backup data or it stops saving backup data.
 Display range: 0 to 100%
 Factory default: 0%
Inner system memory of KRN100 is 512 Mbyte, and KRN100 supports an external USB memory
up to 32 Gbyte. Another file to be saved data is created when it is over 100 Mbyte.
Below table is save time for 100Mbyte data by the number of input channels.
The number of CH Saved time The number of CH Saved time
1 channel Approx. 50 days 7 channels Approx. 25 days
2 channels Approx. 43 days 8 channels Approx. 23 days
3 channels Approx. 37 days 9 channels Approx. 21 days
4 channels Approx. 33 days 10 channels Approx. 20 days
5 channels Approx. 30 days 11 channels Approx. 18 days
6 channels Approx. 27 days 12 channels Approx. 17 days
8.8.4 Memory Clear (Delete memory)
Delete the saved log data on system memory.
Current saving backup data is not deleted when deleting backup data.
 Setting range: Cancel ↔ All Clear
 Factory default: Clear …