Autonics krn100 series User Manual

Table of Contents
viii © Copyright Reserved Autonics Co., Ltd.
7.1 Screen display ...................................................................................................41
7.1.1 Measuring value display ............................................................................. 41
7.1.2 Channel switch ........................................................................................... 43
7.2 Special operation for record ..............................................................................45
7.3 Parameter setting group ....................................................................................46
7.3.1 Parameter setting ....................................................................................... 46
7.3.2 QUICK MENU ............................................................................................ 47
7.3.3 Parameter ................................................................................................... 51
8 Parameter detail setup ............................................................................. 53
8.1 INPUT SETUP(Input setting) .............................................................................53
8.1.1 Select UI Card (Select universal input card) .............................................. 55
8.1.2 Input Set Copy (Copy input parameter) ..................................................... 55
8.1.3 LCD/Paper Record (Display and record measuring value) ........................ 56
8.1.4 Pen Color (Record color)............................................................................ 56
8.1.5 Record Zone (Record zone) ....................................................................... 56
8.1.6 Tag Name (Channel name) ........................................................................ 57
8.1.7 Input Type (Input specification) .................................................................. 57
8.1.8 Range/Scale Point (Decimal point) ............................................................ 58
8.1.9 Display/Temp Unit (Display unit/Temperature unit) .................................... 59
8.1.10 High/Low Range & Graph Scale(Upper/Lower limit input value and graph
scale value) ............................................................................................................. 60
8.1.11 Low Scale/High Scale (Lower limit/Upper limit scale value) ...................... 61
8.1.12 Special Function (Special function) ............................................................ 63
8.1.13 Reference Channel (Reference channel) ................................................... 66
8.1.14 Input Bias(Error correction) ........................................................................ 67
8.1.15 Span (Gradient adjustment) ....................................................................... 67
8.1.16 Record Method (Data storage method) ...................................................... 69
8.1.17 Filter Type (Input digital filter) ..................................................................... 69
8.1.18 Filter Counter (The number of digital filter) ................................................ 70
8.1.19 Burnout Action (Display setting for break) .................................................. 71
8.2 ALARM SETUP (Alarm setting) .........................................................................72
8.2.1 Select UI Card (Select universal card input) .............................................. 73
8.2.2 Alarm Set Copy (Copy alarm parameter) ................................................... 73
8.2.3 Alarm□ Type(Alarm□ operation mode) ....................................................... 74
8.2.4 Alarm□ Ref Channel(Alarm□ reference channel) ....................................... 76
8.2.5 Alarm□ Option(Alarm□ option) ................................................................... 77
8.2.6 Alarm□ Value(Alarm□ set value) ................................................................ 78
8.2.7 Alarm□ Hysteresis(Alarm□ hysteresis) ....................................................... 79
8.2.8 Alarm□ ON/OFF Delay(Alarm□ ON/OFF output delay time) ...................... 80
8.2.9 Alarm□ Alarm No(Alarm□ output alarm number) ....................................... 81
8.2.10 Select Alarm Card(Select alarm output card) ............................................. 81
8.2.11 Alarm-□ Status(Relay and transistor output method) ................................. 82
8.3 DIGITAL INPUT SETUP(Digital input setting) ...................................................83
8.3.1 Select DI Card (Select digital input card) ................................................... 84
8.3.2 DI-□ Type (Select digital input □) ................................................................ 85
8.3.3 DI-□ Reset No (Reset alarm number) ........................................................ 86
8.3.4 DI-□ Status (Operation status) ................................................................... 86
8.4 COMMUNICATION SETUP (Communication setting) ......................................87
8.4.1 Modbus Address (Communication address) .............................................. 90

Autonics krn100 series Specifications

General

Brand	Autonics
Model	krn100 series
Category	Measuring Instruments
Language	English