Autonics krn100 series - Login Admin (Administrator Log In); Change Admin Password (Change Password by Administrator)

8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 127
8.9.2 Login Admin (Administrator log in)
Log in to the parameter by entering password as administrator.
 Setting range: 4 digit number
 Factory default: -
When password is not set yet, default password is “0000”.
When entered administrator’s password is wrong, it displays ‘Fail, ASKey: xxxx’.
Please call our service center (+82-32-820-2356~7) and tell us ASKey and you can check
administrator’s password.
8.9.3 Change Admin Password (Change password by administrator)
Change the previous password. Changing password is able only when login status as
administrator.
 Setting range: 4 digit number
 Factory default: -