Autonics krn100 series - Summer Time Period (Summer Time Period); Alarm Sound (Alarm Sound); Sampling Rate (Sampling Period)

8 Parameter detail setup
114 © Copyright Reserved Autonics Co., Ltd.
8.6.5 Summer Time Period (Summer time period)
Designate summer time (daylight saving time) period.
When Summer Time is set as ‘Enable’, it is activated. Designate Start date/Time, and End
Date/Time.
 Setting range: 01m01d 00h to 12m31d 23h
 Factory default: --
When changing summer time, it creates new backup data.
8.6.6 Alarm Sound (Alarm sound)
Designate Alarm Sound (alarm sound) level when alarm operation turns ON.
 Setting range: OFF ↔ Min ↔ Standard ↔ Max
 Factory default: OFF
8.6.7 Sampling Rate (Sampling period)
Designate sampling rate (Sampling period) of measuring value.
Setting range may be different by the number of connected universal input card(KRN-UI6).
 Setting range
When connecting 1 to 2 universal input card(KRN-UI2): 25↔125↔250ms
When connecting 3 to 6 universal input card(KRN-UI2): 125↔250ms
 Factory default: 125ms
Min. sampling period for TC-R, U, S, T sensors is 50ms.