Autonics krn100 series - Password (Password Mode)

8 Parameter detail setup
126 © Copyright Reserved Autonics Co., Ltd.
8.9.1 Password (Password mode)
You can set password and the mode as user(general user) mode and administrator mode to
restrict parameter setting and record function.
Administrator has every operate authority and user(general user) has only administrator-defined
authority.
Item
Description
Disable Allows every user operation authorization to use all functions.
Enable With administrator’s or user’s log-in and password, allows operation authorization.
When setting the password, lock icon is displayed. In user(general user) mode, lock icon marks
as , and in administrator mode, it marks as .
 Setting range: Disable ↔ Enable
 Factory default: Disable
Password mode setting: Disable → Enable is available without authority. But Enable → Disable
changing is only available by administrator’s authority. Enter the set password at Login Admin to
change the mode. In administrator lock state, when power turns OFF/ON, it changes user lock
mode.