Autonics krn100 series - Reservation Time (Reservation Record Time)

8 Parameter detail setup
118 © Copyright Reserved Autonics Co., Ltd.
8.7.3 Reservation Time (Reservation record time)
Designate reservation record time. When Reservation Type(Reservation record) is set as
‘Repeat(Repeat ON/OFF)’ or ‘Single(Single ON/OFF)’, it is activated to designate Start
Time(Start time) and End Time(End time).
 Setting range: 0/ 00/ 00 to 23/ 59/ 59
 Factory default: --
If reservation record(Reservation record) is set and during reservation recording, digital input is
not available as RUN mode. In stopping recording status by reservation record, it is available.