Autonics krn100 series User Manual

8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 133
8.10.3 Start Date and Time (Start time for data storage)
Set storage start date and time for backup data. You can set start date and time.
Setting range is within start date and time to end date and time.
 Setting range
Date: yyyy/ mm/ dd, Time: hh: mm :ss
 Factory default: 0000/00/00 00:00:00
8.10.4 End Date and Time (End time for data storage)
Set storage end date and time for backup data. You can set end date and time.
Setting range is within start date and time to end date and time.
 Setting range
Date: yyyy/ mm/ dd, Time: hh: mm :ss
 Factory default: 0000/00/00 00:00:00
8.10.5 Backup Print Mode (Backup data record mode)
You can check record mode of current saved backup data.

Autonics krn100 series Specifications

General

Brand	Autonics
Model	krn100 series
Category	Measuring Instruments
Language	English