Autonics krn100 series User Manual

8 Parameter detail setup
132 © Copyright Reserved Autonics Co., Ltd.
8.10.1 Record Backup (Backup data record)
Designate whether recording saved backup data.
Item
Description
Stop
Not printing the designated backup data on Backup Data List, it returns to RUN
mode.
Start
Records the designated backup data on Backup Data List from start date and
time to end date and time and returns to RUN mode.
At RUN mode, the icon for record changes as and flashes. KRN100
reads backup data to the end and starts recording.
(Depending on backup data file size, reading time may take longer.)
When starting printing by Record Backup function, starts recording as below figure.
 Setting range: Start ↔ Stop
 Factory default: Stop
8.10.2 Backup Data List (Backup data list)
You can check saved Backup Data List(Backup data list).
Backup Data is sorted automatically according to the recently occuring order.
For the information of file selection of backup data list, please refer to ‘8.10.6 Select Print Mode
(Backup data recording mode setting)’.

Autonics krn100 series Specifications

General

Brand	Autonics
Model	krn100 series
Category	Measuring Instruments
Language	English