Autonics krn100 series User Manual

8 Parameter detail setup
100 © Copyright Reserved Autonics Co., Ltd.
8.5.3 Standard Speed (Standard record speed)
Designate record speed on recording paper.
Recorder speed is indicated as feed length of recording paper per an hour (mm/h) and it is
activated only when Record Mode(Record mode) is set as ‘Graph(Graph)’.
 Setting range: 10 ↔ 20 ↔ 40 ↔ 60 ↔ 120 ↔ 240mm/h
 Factory default: 20mm/h
8.5.4 Option Speed (Option record speed)
Designate option record speed.
Recorder speed is indicated as feed length of recording paper per an hour (mm/h) and it is
activated only when Record Mode(Record mode) is set as ‘Graph(Graph)’.
After setting DI-□ Type(Select digital input□) as ‘Speed’, select either Standard
Speed(standard record speed) ↔ Option Speed(option record speed) by digital input.
When changing the set value of Standard Speed(Standard record speed), the set value of
Option Speed(Pption record speed) is also changed as same as the set value of Standard
Speed. (Option Speed should not be lower than Standard Speed.)
 Setting range: 10 ↔ 20 ↔ 40 ↔ 60 ↔ 120 ↔ 240 mm/h
 Factory default: 20mm/h

Autonics krn100 series Specifications

General

Brand	Autonics
Model	krn100 series
Category	Measuring Instruments
Language	English