8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 129
8.9.6 Firmware Upgrade (Firmware upgrade)
Updates KRN100 firmware.
When upgrading firmware, parameters’ set values are reset.
Setting range: -
Factory default: Automatically set
Firmware upgrade
Visit our homepage (www.autonics.com) to download ‘KRN100 firmware file
(krn100.fwu)’.
Copy the downloaded firmware file to an USB memory’s loot (top) directory and
connect an USB memory to KRN100.
Check that firmware is recognized on "USERINFORMATION SETUP -Firmware
Upgrade" menu.
Check currrent version’s date and to-be upgraded version’s date. Select ‘Upgrade’
button and it starts firmware upgrade.
Before processing, warning message appears. Select ‘OK’.
To Next Page
Loading...
