Autonics krn100 series - Reservation Period (Reservation Record Period)

8 Parameter detail setup
© Copyright Reserved Autonics Co., Ltd. 117
Reservation Period(Reservation record period) setting: Start Date 2011/ 1/ 1, End Date
2011/ 1/ 3
Reservation Time(Reservation record time) setting: Start Time 12/ 00/ 00, End Time 23/ 59/
59
It records data every at from 12:00:00 to 23:59:59 in from 1
st
, Jan, 2011 to 3
rd
, Jan, 2011.
(2) Single(Single ON/OFF)
Starts recording at the start set time on start date and finishes recording at the end set time
on end date.
Reservation Period(reservation record period): Start Date 2011/ 1/ 1, End Date 2011/ 1/ 5
Reservation Time(reservation record time): Start Time 12/ 00/ 00, End Time 23/ 59/ 59
It starts recording at 12:00:00 on January 1
st
2011 and finishes it at 23:59:59 January 5
th
2011.
8.7.2 Reservation Period (Reservation record period)
Designate reservation record period. When Reservation Type(Reservation record) is set as
‘Repeat(Repeat ON/OFF)’ or ‘Single(Single ON/OFF)’, it is activated to designate Start
Date(Start date) and End Date(End date).
 Setting range: 2000 / 01 / 01 to 2099 / 12 / 31
 Factory default: --